C
D
B
✓
A
2
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
The
EASTWOOD 4” X 16” MINI MILL
is a highly capable machine able to perform as a Drill Press with up to 1/2” [13mm] drill shank capacity and as a fully
functional manual Milling Machine with up to 5/8” end mill capacity (3/8” included). The 2 axis Table, along with a 45° left or right tilting column design,
allows drilling or milling virtually any surface. A 0-2500 RPM Motor Control with a 2 Speed gearbox provides the versatility to accommodate most materials.
The standard R8 Taper arbor will accept a wide variety of Collets, Drills and other accessories.
CONTENTS
MILL UNIT
(1)
Main Mill Unit
[A]
(1)
[R8] 1/2” [13mm]
Drill Chuck (installed)
[B]
(1)
Drawbar (installed)
[C]
(1)
Chip Shield (installed)
[D]
SPECIFICATIONS
Power Requirements:
120 VAC, 60hz.
Motor Amps:
4.5Amps
Cross Table Travel:
4” [100mm]
Longitudinal Table Travel:
7” [180mm]
Spindle Rotary Angle:
90° (+/- 45° of vertical)
Spindle Speed:
- Low Range: 0-1100 RPM
- High Range: 0-2500 RPM
Spindle Bore Taper:
R8
Maximum Drilling Capacity:
1/2” [13mm]
Maximum End Milling Capacity:
5/8” [16mm]
Maximum Face Milling Capacity:
1-1/8” [30mm]
Spindle Bearings:
Sealed and Permanently Lubricated
✓
✓