To order parts and supplies: 800.343.9353 >> eastwood.com
19
PROBLEM
CAUSE
CORRECTION
Inaccuracies
in tolerances/
dimensions
along entire
workpiece
Backlash has not been compensated
Compensate for Backlash per procedure described in this manual.
Worn or incorrect Tool profile
Sharpen Tool or select better profile.
Too much play in the Gibs
Adjust Gibs per procedure described in this manual.
Table Travel,
Cross-Feed
or Headstock
loose or sloppy
Too much play in the Gibs
Adjust Gibs per procedure described in this manual.
Handwheel loose
Tighten Handwheel attachment.
Table Travel,
Cross-Feed or
Headstock dif-
ficult to move
Gib Screws adjusted too tightly
Adjust Gib Screws per procedure described in this manual.
Buildup of dirt or chips in Gibs
Loosen and remove Gibs to clean and lubricate. Readjust Gib Screws per
procedure described in this manual.
Slides dirty and/or dry
Clean and lubricate Slides.
TROUBLESHOOTING