22 Adjustments
Factory settings are as follows:
SV (Set Value, your set point) is set to 400°.
AL-1 is set to 250°
400° - 250° = 150°
To set AL-1 so the machine will shut down at 150°, press the left-arrow key and the
right-most digit will flash. Use the up- or down-arrow key to select the digit, and then
press the left-arrow key again. Use the up- or down-arrow key to set the digit and
repeat until the correct value is displayed. Press MD to lock in the setting.
9. Press MD and scroll through the menu until LOC is displayed.
10. Press the left-arrow key. (OFF will begin flashing.)
11. Press the up-arrow key. (OFF changes to ON, and ON is flashing.)
12. Press MD. (On stops flashing.)
13. Press and hold the MD key until PV and SV temperatures are displayed.
Содержание ET2008
