E.zicom e.ziclean, Руководство пользователя

Страница: 23 / 70

. EN .
9. Turning on your robot.
The e.ziclean® HOBOT must be connected via its power supply cord in order to function. If your
robo t’s access to the glass pane is limited, use the extension power provided for this purpose.
Although very simple, the steps must be executed in the following order:

e.ziclean® HOBOT must be fully charged before being
turned on. Ensure that the Battery LED is green.

Secure the e.ziclean® HOBOT by fastening it using its
security cord. The clasp must be fixed inside your home.
 Position the robot on the glass panel to be cleaned, all
the while holding it firmly.

Turn the robot on from the On/Off switch. Make sure
that the device is well attached to the glass panel before
releasing it.
 Activate the navigation mode you wish to use from the
remote control.
Reminder
Make sure that the glass panel to be cleaned is free of any interfering element that may constitute
a risk of scratching. Do not use the e.ziclean® HOBOT outdoors in the event of rain.
10. Turning off your device.
In order to stop the e.ziclean® HOBOT robot, follow the procedure below:
 Pick up the robot once it is in close proximity.
As needed, bring the device towards you using the
remote control’s manual control option. Hold the
device firmly.

Stop the robot by pressing the On/Off switch.