ALIGNMENT AND PERFORMANCE TESTS
4-3
Revised January 2001
Part No. 001-9800-501
Figure 4-2 PCTune Main Screen
5. The computer then attempts to establish communi-
cation with the transceiver. When communication is
established, “Com Link Established” is displayed in
the “Status” box and “TUNING” is indicated in the
transceiver display. Instructions are then displayed
in the “Instructions” box on how to proceed with
each adjustment.
Figure 4-3 Tune Parameters Screen
4.1.5 READING CURRENT SETTINGS
To read and display the settings currently
programmed in a transceiver, select Tuning > Display
Tune Parameters from the Menu bar. The screen in
Figure 4-3 is then displayed. The following functions
can be performed from this screen:
•
To read the settings in the transceiver from this
screen, click the “Read” button.
•
To write the settings in this screen to the transceiver,
click the “Write” button.
•
To set all parameters in this screen to a default level,
click the “Set Defaults” button.
•
To set only the RSSI levels to the default level, click
the “Set RSSI Defaults Only” button.
4.2 TRANSMIT POWER OUTPUT
1. Connect a wattmeter and 50-ohm load to the
antenna jack as shown in Figure 4-1. Manually or
automatically select “Tx Power” and follow the on-
screen instructions.
