PROGRAMMING
3-16
Revised January 2001
Part No. 001-7780-501
SMARTNET/SmartZone Other IDs Screen
Individual ID - Uniquely identifies the radio on a
particular system. Each radio must have a different
Unit ID. Valid Unit IDs are from 1-65535.
Connect Tone - The tone expected by the controller
on the traffic channel to verify that a subscriber
transmission is occurring. This tone should be set
the same as it is in the controller.
3.6.4 SMARTNET/SMARTZONE SYSTEM
PHONE INTERCONNECT SCREEN
The SMARTNET/SmartZone Phone Intercon-
nect screen is shown above, and the parameters it
programs are as follows:
Phone Interconnect
Refer to Section 2.5.6 for more information on
telephone calls.
Disabled - Telephone calls cannot be placed or
received.
Answer Only - Telephone calls can be received but
not placed.
List Only - Telephone calls can be placed and
received, and numbers can be recalled from memory
only.
Unlimited - Telephone calls can be placed and
received, and numbers can be recalled from memory
or dialed using a microphone keypad.
Private Call
This is the same as the preceding Phone Intercon-
nect except it is for private (unit-to-unit) calls. Refer to
Sections 2.5.4 and 2.5.5 for more information.
Private Call II
This programs either standard (Private Conversa-
tion II
™
) or enhanced (Enhanced Private Conversa-
tion
™
) private calls as follows:
Standard - The user does not receive any feedback
when the called radio is not active in the system.
Only a “No Answer” is received if the called radio
does not answer.
Enhanced - When a call is placed, the system tells
the user if the called radio is currently active in the
system and within range. The calling radio displays
“NO ACK” if the called radio is not active in the
system and “NO ANSWR” if it is active but does
not answer.
Phone DTMF Timing
Initial Delay - Delay from 50-500 milliseconds from
when a traffic channel is granted for phone intercon-
nect to the start of the dialing out of the phone
number.
Digit Duration - Duration from 50-500 milliseconds
of each phone number digit.
Inter-Digit Delay - Delay from 50-500 milliseconds
between each digit of a phone number.
3.6.5 SMARTNET/SMARTZONE SYSTEM
TALK GROUPS SCREEN
The SMARTNET/SmartZone Talk Groups screen
is used to set up SMARTNET/SmartZone talk groups
