PROGRAMMING
3-18
Revised January 2001
Part No. 001-7780-501
Normal - When the user presses the Emergency
option switch, an emergency signal is sent to the
dispatcher. Audio and visual feedback is provided
by the radio.
Silent - Same as “Normal” except no audio or visual
feedback is provided.
Retry Counter - When “Unlimited” is selected, an
emergency call is repeated until acknowledged or
canceled. When “Limited” is checked, calls are
attempted only the specified number of times.
3.6.7 SMARTNET/SMARTZONE SYSTEM LISTS
SCREENS
Clicking System Lists in the left pane or the
button in the SMARTNET General screen
(if applicable) displays the screens used to program the
various lists that are unique for each SMARTNET/
SmartZone system. These screens are as follows:
Trunking Phone List Screen
This screen programs the phone number list if
used (see Section 2.5.6). To edit this list, click the
Trunking Phone List tab and then the “Modify List”
button on the right side of the screen. The following
information is then programmed in the dialog box that
is displayed:
Entry Number - This box selects the entry to be
edited. The scroll bars to the right of this box select
the desired entry. A phone list can contain up to 16
entries. Selecting a new entry number automatically
validates and stores the current entry. If the current
entry contains an invalid field (for example, too
many digits in the phone number), the entry number
does not change and the invalid field is highlighted.
Entry Alias - Up to 8 characters can be entered to
identify the phone number. This identification is
displayed when phone numbers are selected by the
user from the list. Only uppercase letters can be
entered, so lowercase letters are automatically
converted to uppercase by the program.
Phone Number - This is the number dialed when the
location is selected. Characters that can be entered
include 0-9, #, (,), and P (a “P” programs a pause).
The maximum number of digits excluding (,) and
spaces is 16, and the maximum including (,) and
spaces is 24.
Close - Clicking this button verifies the current
entry, stores it, and then closes the dialog box. If the
current entry contains an invalid field, the dialog
box does not close and the invalid field is high-
lighted.
Help - Accesses the Help screen. Help can also be
selected at any time by pressing the F1 key.
Message Aliasing Screen
This screen associates an alias (name) with each
message number (see Section 2.5.8). To edit this list,
click the Message Aliasing tab and then the “Modify
List” button on the right side. The following informa-
tion is then programmed in the dialog box that is
displayed:
Message Number - This box selects the message to
be edited. The scroll bars to the right of this box
select the desired message number.
Message Alias - Programs the alias which can be up
to any 8 alphanumeric characters.
