manualshive.com logo in svg

E.F. Johnson LTR-NET 9883, Руководство по обслуживанию

Поделиться
Скачать
E.F. Johnson LTR-NET 9883 Скачать руководство пользователя страница 35

PROGRAMMING

3-9

Revised January 2001

Part No. 001-7780-501

Radio Wide SMARTNET/SmartZone Screen

it performs this scan before it checks the expected 
frequencies again. After it checks these frequencies, it 
returns to full spectrum scanning. This cycle repeats 
until a control channel is found.

On-Off - Enables or disables full spectrum scan.

Timer - Sets the time that full spectrum scanning 
occurs as just described.

Hot DTMF

Enable/Disable - When enabled, allows the user to 
send DTMF tones while transmitting. When 
disabled, pressing numeric keys (0-9, 

, #) while 

transmitting has no affect. 

Display Options

These functions select what is displayed when 

group calls are received (see Section 2.5.3). If neither 
function is selected, the selected talk group alias is 
always displayed. Both cannot be selected. 

Talk Group on Rx - The alias of the talk group on 
which the call is being received is displayed.

PTT ID - The ID of the mobile placing the call is 
displayed. If the ID matches an ID in the Trunking 
Call List, the alias of that ID is displayed instead.

Scan Talkback 

When a message is received when scanning, this 

parameter selects how the radio responds during the 
call hang time. “Selected Group” forces it to transmit 
on the selected talk group, and “Active Group” forces 
it to transmit on the scanned or active talk group. 

Voice On Control

With SmartZone operation, some remote sites are 

designated Voice On Control sites. In these sites, if all 
available traffic channels are occupied, control chan-
nels become traffic channels when additional traffic 
channels are requested. The Voice On Control parame-
ters determine how the radio reacts to various situa-
tions that may occur. For example, when a conversa-
tion is complete, the radio may look for a control 
channel that has become a traffic channel.

Enable/Disable - Determines if the voice on control 
parameters are active.

Site Lock Time - This is the amount of time a radio 
remains on the Voice On Control site before looking 
for another site.

Activation Time - This is the amount of time the 
radio waits when the control channel comes back 
from Voice On Control before it transmits any 
pending ISWs. This prevents all radios on a Voice 
On Control site from submitting ISWs at the same 
time.

Pending Emergency Time - This is the amount of 
time the radio waits to submit an Emergency ISW 
after the control channel returns from the Voice On 
Control mode.

Adjustable Parameters

Busy Override Delay - With SmartZone operation, 
this is the amount of time a user must press the PTT 
switch to override a SmartZone busy that occurs 
because some member of the talk group is present at 
a site where there are no traffic channels available.

Affiliate Hold Off - With SmartZone operation, this 
is the delay time that occurs after acquiring the 
control channel before it sends an affiliation ISW. 

*

Содержание LTR-NET 9883






































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды