manualshive.com logo in svg

E.F. Johnson LTR-NET 9883, Руководство по обслуживанию

Поделиться
Скачать
E.F. Johnson LTR-NET 9883 Скачать руководство пользователя страница 33

PROGRAMMING

3-7

Revised January 2001

Part No. 001-7780-501

3.4 RADIO-WIDE PARAMETER SCREENS

3.4.1 INTRODUCTION

The radio-wide screens program the parameters 

that are the same for all systems, channels, and zones. 
Separate screens are used for General, Conventional, 
SMARTNET/SmartZone, and Mobile Options param-
eters. Refer to the information which follows.

3.4.2 RADIO-WIDE GENERAL SCREEN

Band

Displays the operating band selected by the Radio 

Type Menu (see Section 3.3.2). The selected oper-
ating band must match that of the radio being 
programmed. 

Zones

Total Zones - The total number of zones currently set 
up. The maximum number allowed is 16. Zones are 
added by clicking the Add button (see following).

Current Zone - Indicates the currently selected zone. 
To select another zone, click the up/down arrows.

Zone Alias - Edits the unique alpha identification 
for the displayed zone. Up to 8 characters can be 
entered. The zone alias is briefly displayed when-
ever a new zone is selected. Refer to Section 1.5.3 
for more information on zones.

Add (Zones) Button - Adds another zone.

Delete (Zones) Button - Deletes the last zone added.

Defaults

Home Zone - Selects the zone that is selected by the 
Home Zone option switch if programmed.

Options

Power-Up On Home Zone - If checked, the home 
zone is always selected at power-up.

Beeps - If checked, all tones are enabled. Otherwise, 
no tones sound (see Section 2.3.8).

NOTE: With PCTrunk, Version 5.10.0 or later, the 
following screens are selected by clicking their name 
in the left pane, not by clicking the button in the 
General screen.

 Radio Wide Scan List

NOTE: The radio-wide scan list cannot be pro-
grammed until all channels to be included have been 
set up as described in the Conventional and 
SMARTNET/SmartZone sections (3.5 and 3.6,
respectively).

Clicking the Radio Wide Scan List name in the 

left pane or that button in the General screen displays 
the following screen which programs the radio-wide 
scan list described in Section 2.3.11. The buttons and 
other parameters in this screen are as follows:

Radio-Wide Scan List Screen

Содержание LTR-NET 9883






































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды