E.F. Johnson Company 5300 ES Series Скачать руководство пользователя страница 81 | Manualshive

Страница: 81 / 142

background image

5300 ES Series Mobile Radio Operating Manual

6-3

SMARTNET / SmartZone / P25 Trunked Features

- If a continuous tone sounds and “OUT OF RANGE” is displayed, you may be out of

range of the site or blocked from it by radio-shielding structures or objects. Drive
away from shielding structures or objects and try again. If this does not work, drive
closer to the site.

- If your unit ID is invalid, the call is being made to an invalid group ID, or group calls

are not enabled, “DISABLED ID” is displayed and an alert tone sounds.

- If an attempt is made to change an analog channel from the clear to the secure mode

and there is no available secure channel, “CLEAR ONLY” is flashed, an error tone
sounds, and the call is terminated.

- If an attempt is made to change an analog channel from the secure to clear mode,

“SEC ONLY” is displayed, an error tone sounds, and the call is terminated. (Calls on
digital channels can be changed if they are not strapped to clear or secure).

- If the Secure mode is selected by the C/S (Clear/Secure) option switch and an attempt

is made to transmit on a channel strapped as Clear, “CLEAR ONLY” is displayed
and the transmitter is disabled. Likewise, if the Clear mode is selected and the
channel is strapped as secure, “SECURE ONLY” is displayed and the transmitter is
disabled.

6.3.2

Receiving a Standard Group Call

Calls are received on only the talk group and/or announcement group programmed for the
selected channel (with scanning disabled). When the selected channel is programmed with
both Talk and Announcement groups, only the Talk and Announcement group IDs are
detected. Other IDs in the Announcement group are detected only if no talk group is
programmed.

When a group call is received, the alias of the selected channel is displayed. The radio can
be programmed so that the following are also displayed for 0.5-7.0 seconds or
continuously during the call.

PTT ID- The unit ID of the mobile placing the call is displayed.

TG on Rx - The alias of the talk group on which the call is being received is displayed
(typically for use by technicians).

User Group ID - If the group ID of the call being received is included in a
preprogrammed User Group ID list, the alias programmed in that list for that group is
displayed.

«
...
79
80
81
82
83
...
»

Содержание 5300 ES Series















































































































































Отзывы:

Нет отзывов

Похожие инструкции для 5300 ES Series

Бренд: B&G Страницы: 29

Бренд: MagicBox Страницы: 20

Бренд: Tait Страницы: 108

Бренд: switel Страницы: 56

Бренд: Technika Страницы: 24

Бренд: Technoline Страницы: 62

Бренд: Tecsun Страницы: 24

Бренд: Benthos Страницы: 68

Bearcat BC148XLT

Бренд: Uniden Страницы: 23

Бренд: Sirius Satellite Radio Страницы: 88

Бренд: Cobra Страницы: 22

Бренд: Cobra Страницы: 23

Бренд: Midland Страницы: 7

Бренд: Vertex Standard Страницы: 32

Бренд: Midland Страницы: 40

Бренд: GARNI Страницы: 4

Бренд: TEXAS RANGER Страницы: 29

RF-DAB-BEDSIDE1

Бренд: Renkforce Страницы: 76

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды