E.F. Johnson Company 5300 ES Series Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 142

background image

4-8

5300 ES Series Mobile Radio Operating Manual

Radio Wide Features

There are two scan modes available: Priority (standard) and Radio Wide. The operation of
the priority type is unique to the system type programmed on the selected channel, and the
operation of the Radio Wide type is the same regardless of the system type programmed
on the selected channel. Only one type of scanning can be enabled at a time. For example,
if priority scanning is enabled and Radio Wide Scan is enabled, priority scanning is
automatically disabled and vice versa. Refer to the following for more information.

4.12.1 Priority (Standard) Scanning

Priority scanning (also referred to as standard scanning) monitors only channels that are
the same type as that currently selected. For example, if a conventional channel is selected,
only conventional channels are scanned and likewise for SMARTNET/SmartZone and
Project 25 trunked channels.

For more information on scanning functions in the Conventional mode, refer to Section
5.10, and for more information on how it functions in the other modes, refer to Section
6.11. Scanning is turned ON and OFF by the Scan option switch as follows. If this switch
is not programmed, scanning is not available.

• To turn priority scanning on, press the SCAN option switch. Scanning is enabled when

a rotating is indicated in the right status display as follows and “SCAN ON” is briefly
displayed.

• To turn scanning OFF, press the SCAN option switch again. Scanning is disabled when

“SCAN OFF” is briefly displayed and

is no longer indicated in the status display.

• If the zone or channel is changed while scanning is selected, scanning continues on the

same or a different scan list (see Section 4.13.1).

Note

Each SMARTNET/SmartZone and P25 trunked channel can be programmed so that
scanning is automatically enabled when the channel is selected.

4.12.2 Radio Wide Scanning

Radio wide scanning monitors the channels in the preprogrammed radio wide scan list.
This scan list may contain up to 16 channels of any type assigned to any zone (see Section
4.13.2). With Radio Wide Scanning, you cannot have priority channels: Only one Radio
Wide Scan list. Radio wide scanning is turned ON and OFF by the RWS option switch as
follows. If this switch is not programmed, radio wide scanning is not available.

Scan Enable Indicator

«
...
44
45
46
47
48
...
»

Содержание 5300 ES Series















































































































































Отзывы:

Нет отзывов

Похожие инструкции для 5300 ES Series

Бренд: E-Bench Страницы: 37

Бренд: K40 Страницы: 2

Бренд: Navman Страницы: 52

Бренд: Blaupunkt Страницы: 56

Бренд: Furuno Страницы: 4

Бренд: bca Страницы: 6

Бренд: Caliber Страницы: 18

Бренд: Bush Страницы: 25

Бренд: Goji Страницы: 36

Бренд: LENCO Страницы: 3

Бренд: Audiovox Страницы: 30

Бренд: Kongsberg Страницы: 74

Бренд: Vertex Standard Страницы: 40

Бренд: JVCKENWOOD Страницы: 112

Бренд: Arion Страницы: 31

Бренд: COMNET ERICSSON Страницы: 32

cNODE MiniS 1.11-50V Ti

Бренд: Kongsberg Страницы: 48

Бренд: Currys Essentials Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды