DYSIS Ultra 2.0 Digital Colposcope Instructions for Use
0230-53095, Rev 05
Revision Date 05-Mar-2021
Page
8
of
79
Never attach the DYSIS speculum to the optical head before inserting it into the vagina.
Do not apply any force on top of the optical head during an examination or at any other time (especially if a
DYSIS speculum is connected).
Sequence of actions to power up the device:
•
Connect the main power cable to the appropriate outlet, or (if already connected)
•
Press the green power button
•
The computing unit will power up and the software application will start.
Sequence of actions to power down the device:
•
Press SHUT DOWN button (using the touch screen) from the left side panel. DYSIS Ultra 2.0 Digital
Colposcope will shut down automatically.
•
To avoid power consumption when idle, turn the green power button on the base to OFF position after
the unit has completely shut down.
The DYSIS Ultra 2.0 Digital Colposcope calibration card should be maintained so it is clean and in good
condition.
Ensure any external data storage media have been checked for malware (viruses, trojans, etc.) before
connecting to DYSIS Ultra 2.0 Digital Colposcope.
Do not spray solutions or liquids into air vents.
Do not immerse any part of the device in cleaning solutions and do not sterilise any part of the device.
If the device is accidentally contaminated during an exam, use only indicated disinfecting solution to cleanse
it. Before attempting this disinfecting action, the device needs to be powered down and the power cables
should be disconnected.
Wear the correct Personal Protective Equipment (PPE) when disinfecting any part of the device.
(This Caution Symbol Applies to the Safety Cautions Below)
Do not stare directly at the light source in the optical head unit.
Using the handle of the imaging head to transport the device may result in a loss of device performance and
stability and could cause user/patient injury.
To ensure optimal operation and safety, users should not remove any of the connectors on DYSIS Ultra 2.0
Digital Colposcope.
When using the DYSIS Acetic Acid Applicator, the acetic acid container should not be over-filled.
Do not spray any liquids if the tubes of the spray mechanism have been disconnected or detached.