
DYSIS Ultra 2.0 Digital Colposcope Instructions for Use
0230-53095, Rev 05
Revision Date 05-Mar-2021
Page
19
of
79
12.
Powering on the DYSIS Ultra 2.0 Digital Colposcope
To power on the DYSIS Ultra 2.0 Digital Colposcope, ensure it is plugged in to a power supply and press the
green power button on the BASE (above the power plug). The DYSIS software should launch automatically
when powered on and the on/off switch will illuminate green.
DO NOT TOUCH THE BUTTONS ON THE BACK OF THE MONITOR. FAILURE TO FOLLOW THESE
RECOMMENDATIONS CAN RESULT IN MONITOR MALFUNCTION.
13.
Powering Off the DYSIS Ultra 2.0 Digital Colposcope
To turn off the DYSIS Ultra 2.0 Digital Colposcope, press SHUTDOWN from the left panel of HOME screen or
from the LOGIN screen and wait for the DYSIS Ultra 2.0 Digital Colposcope to shut down. DO NOT SWITCH THE
DYSIS Ultra 2.0 Digital Colposcope OFF BY CUTTING THE POWER OR OPERATING THE POWER SWITCH UNTIL IT
HAS SHUT DOWN FROM THE TOUCHSCEEN. FAILURE TO FOLLOW THESE RECOMMENDATIONS CAN RESULT IN
LOST DATA.
14.
Overview
–
Operating DYSIS Ultra 2.0 Digital Colposcope
DYSIS Ultra 2.0 Digital Colposcope with DYSISmap is a digital colposcope designed to image the cervix and
lower genital tract under illumination and magnification. The DYSISmap feature is an adjunctive tool for
displaying areas of acetowhitening. It is a tool that should NOT be used as a substitute for a thorough
colposcopic evaluation.
The DYSISmap feature analyses synchronised still images of acetic acid application to present a colour-map
overlay intended to help clinicians visualise aceto-whitened areas of the cervix. Use of the DYSISmap feature
is NOT a substitute for the conventional colposcopic view. When using DYSIS Ultra 2.0 Digital Colposcope
with DYSISmap, you must ALWAYS first conduct a thorough colposcopic examination and identify and select
areas for biopsy. You may then use the DYSISmap feature to identify, where appropriate, one or more
additional biopsy sites. NEVER cancel any of the biopsy sites initially identified with the conventional
colposcopic view. The software embedded in DYSIS Ultra 2.0 Digital Colposcope has been designed to ensure
that you are able to comply with this requirement when using DYSIS Ultra 2.0 Digital Colposcope
in ‘TRIAL’
mode. Therefore, the examination process will proceed as follows:
Examination preparation
Initiate DYSISmap procedure