18
1) Set a RCF.
CAUTION:
● Do not exceed the allowable maximum RCF of the buckets, adapters, and
tubes/bottles.
● RCF is calculated with the maximum radius and the rotating speed.
(1) Set the RCF value.
①
Press
button.
The Speed/RCF symbol
blinks.
When the symbol unit is rpm, it indicates you can input speed value. But press the
button again, the symbol unit will shift to RCF, then you can input RCF value.
If no button is pressed after the symbol
having blinked for 4 seconds, the symbol
will stop blinking, and the inputting mode will be closed.
②
Press
and
buttons to set a RCF value.
The step size is 50 ×g.
(2) Set running condition
Set running time, sample temperature, acceleration and deceleration rate according to
7.1-4 section.
7.3 Programmed Operation
This centrifuge has nine groups of parameter in its memory and all this parameter can
be recalled directly. This function can help to save the parameters that are commonly
used.
NOTE:
Press
button to call and save programmed parameters.
Newly programmed parameters will overwrite the old ones.
1) Programming the running parameters.
(1) Turn on the power switch and set the rotor onto the drive shaft.
(2) Press
button and the symbol
blinks. User can input serial number of
program.
(3) Press
or
button to choose your desired program. The running parameters
will display on LCD screen and change with the serial number.
(4) Modify the operating parameters please refer to section 7.1-4.
