Installing the Motherboard
Install the motherboard according to the following procedures:
1.
Seat the motherboard in the correct position on the logic upper assembly.
2.
Tighten four M2×3 screw
□
,1 to secure the motherboard to logic upper assembly as shown
in Figure 4-13.
3.
Connect the eDP cable
□
,2/ DCIN cable
□
,3/ sensor board FFC
□
,4
□
,5/ TP FFC
□
,6
□
,7/ keyboard FPC
□
,8
□
,9/ IO FFC
□
,10
□
,11/ FP FFC
□
,12
□
,13 to the
motherboard as shown in Figure 4-13. Make sure the FPC and the connectors are properly
engaged and firmly secured.
