1. Removing the Lithium Ion Battery (Main Battery, No coin cell battery)
Please refer to the information below for instructions regarding the identification and removal
of the Lithium ion battery.
Further maintenance instructions can be found in section of the
Satellite C30-K
Maintenance Manual
.
Some tools are required in order to remove this component. Once removed, these
components should be recycled as per local requirements.
To remove the battery, the base assembly must be removed first:
4.2 Base cover
Removing the base cover
Remove the base cover according to the following procedures and Figure 4-1.
1. Turn the laptop upside down so that the bottom is facing up.
2. Remove the six M2x5 screws
□
,1 and four M2x3 screws
□
,2 (This four screws have
angle to fix D cover).
3. Press the cover-edge and pry up the base cover from the inner edges, starting from the
top□,3, then along the sides
□
,4 and then the bottom
□
,5.
4. Slightly shake the base cover to release the center snap on base cover
□
,6.
5. Remove the base cover
□
,7.
Figure 4-1 Removing the Base Cover
