4.4 Fan and Thermal Module
Removing the fan and thermal module
Remove the fan and thermal module according to the following procedures and Figure 4-3 & Figure 4-4
1.
Peel off the W-
LAN Mylar securing the cable connector in place□,6 and disconnect the two W
-LAN antennas
(White/Black color) from
motherboard□,7 as shown in Figure 4
-4.
2.
Gently pull up the W-LAN antennas out of the routing channels on fan
□
,8.
3.
Disconnect the Fan cable from the motherboard
□
,1.
4.
Remove the two M2x3 screws and fan
□
,2.
5.
Remove the three M2x3 screws according to the number sequence (5->4->3) indicated in Figure 4-3.
6.
Remove the thermal module.
