4.15 Antenna Module
Removing the Antenna module
Remove the Antenna module according to the following procedures and Figure 4-27.
1.
Removing the Antenna cable from the adhesive and remove it from the Hinge
□
,1
2.
Gently pry up the Cu-Foil from the adhesive and remove it from the LCD cover
□
,2.
3.
Removing the Antenna module from the adhesive and remove it from the LCD cover
□
,3
4.
Removing the Antenna module cable from the LCD cover
□
,4
□
,5
5.
Gently pry up the Cu-Foil from the adhesive and remove it from the LCD cover
□
,6.
6.
Removing the Antenna module from the adhesive and remove it from the LCD cover
□
,7
Figure 4-27 Removing the Antenna module
NOTE:
Antenna module
is fastened by adhesives. Remove it slowly and carefully.
