Installing the Speakers
Install the speakers according to the following procedures:
1.
Seat the speakers in the correct position and secure it in place on the logic upper assembly
□
,3 as shown in Figure 4-8.
2.
Route and secure the speaker cable in the routing channels as shown in Figure 4-9.
3.
Connect the speaker cable to the motherboard
□
,1 as shown in Figure 4-8.
Figure 4-9 Speaker Cable routing channels on upper
NOTE:
Take care not to pinch the cables. Make sure the routing positions of the cables
are correct and do not block any components, such as screw holes.
