DVS SpycerBox Flex, Руководство по оборудованию

Страница: 32 / 84

Overview
 Overview of the Rear
2-14
SpycerBox Ultra/Flex | Hardware Guide | Version 3.1
Rohde & Schwarz DVS GmbH
No. Item Explanation
1 mouse PS/2 connector to connect a mouse to the
system
2 COM port RS-232 connector for the connection of se-
rial interface devices
3 IPMI Dedicated LAN port for IPMI 2.0 (Intelligent
Platform Management Interface) providing
KVM (Keyboard, Video, Mouse redirection)
as well; for further information see the doc-
umentation(s) of the original manufactur-
er(s)
IPMI can be activated by assigning
an IP address to its port via the DVS
Configuration Tool (see section
“DVS Configuration Tool” on
page 4-3). After the assignment
you may have to wait several min-
utes before the configuration takes
effect.
4 CEN/LFE Connector for center out and subwoofer
speakers
5 line in Connector to input audio signals
6 keyboard PS/2 connector to connect a keyboard to
the system
7 VGA DB-15 connector (female) to connect a
monitor; normally with an extra graphics
card installed, this connector will not be op-
erational; however, it can be used in combi-
nation with IPMI/KVM for system
management; if you want to use this port,
please contact R&S DVS directly in case of
setup questions
8, 9 USB ports These USB connectors (universal serial bus)
offer you the possibility to connect other
devices to your system
10 LAN (1000 Mb) Gigabit Ethernet (1000 Base-T) connection
ports to connect the system to a network
11 back surround Connector for rear surround speakers
12 side surround Connector for middle surround speakers