DVS SpycerBox Flex, Руководство по оборудованию

Страница: 79 / 84

A-11 SpycerBox Ultra/Flex | Hardware Guide | Version 3.1
Rohde & Schwarz DVS GmbH
Appendix
 Conformity Declarations

SpycerBox Ultra

SpycerBox Flex
FCC Notice
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful in-
terference when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Op-
eration of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the inter-
ference at his own expense.
Note: Connecting this device to peripheral devices that do not comply
with Class A requirements or using an unshielded peripheral data cable
could also result in harmful interference to radio or television reception.
The user is cautioned that any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate this equipment. To ensure that the use of this prod-
uct does not contribute to interference, it is necessary to use shielded
I/O cables.
A.4.4 Korea Certification
The KC (Korea Certification) mark applies for all types of electronic
products and unifies several existing certification marks. The KC Mark
is required for all new products subject to compulsory certification un-
der laws and ordinances pertaining to safety, health, environment and
quality. Rohde & Schwarz DVS GmbH herewith declares that the fol-
lowing equipment has been tested according to the applying valid KC
regulations:

SpycerBox Flex
Figure A-2: KC certificate