DVS SpycerBox Flex, Руководство по оборудованию

Страница: 45 / 84

4-5 SpycerBox Ultra/Flex | Hardware Guide | Version 3.1
Rohde & Schwarz DVS GmbH
Operation
 Shutting Down the System
4.4 Shutting Down the System
There are several possibilities to shut down the R&S DVS system. All
depend on whether the operating system is already loaded, frozen or
not completely loaded. Please act accordingly.
To shut down the system perform the following according to the state
of the system’s operating system:
With the operating system fully loaded
If the operating system is up and running, there are two ways to shut
down your system:
1.
Turn the system off by shutting down the operating system the
usual way (see also section “DVS Configuration Tool” on page 4-3
and section “R&S DVS SAN Remo” on page 4-4).
The operating system will then save your personal settings and once it
has ended, the system will turn off.
Some settings will be saved and afterwards the system turns off.
For a complete description of the features of SAN Remo and how to use
it refer to the “SAN Remo Configuration Management” supplement.
How to use SAN Remo for the SpycerBox High Availability Option is de-
scribed in the “SpycerBox High Availability Administration Supple-
ment”.
After a shut-down wait at least ten seconds before starting the system
again. This time is needed to safely erase all memory banks of the sys-
tem.
Alternatively, you can initiate a fast shut down by pressing the power
switch briefly.
Data and configuration losses
The fast shut down may not save all your system data and personal
settings before the system turns off.
Save all data and settings before shutting down the system.