DVS SpycerBox Flex, Руководство по оборудованию

Страница: 27 / 84

2-9 SpycerBox Ultra/Flex | Hardware Guide | Version 3.1
Rohde & Schwarz DVS GmbH
Overview
 Overview of the Front
2.2.6 Operation Items
With the operation items at the system’s front the hardware of the
SpycerBox can be controlled (e.g. turned on or off). There you can also
find LEDs that allow you to assess the state of the R&S DVS system as
well as USB connectors.
Figure 2-10: Operation items overview
disk carrier The disk carriers hold each one hard disk of the
array. The hard disks are mounted to the disk
carriers with several screws.
lever Once the lever is unlatched with the opener, it
can be used to pull the disk carrier and its hard
disk out of the system.
opener Unlatches the lever and with it the disk carrier.
LED disk power Shows whether the disk of the disk carrier re-
ceives power.
LED disk activity Indicates the status of the hard disk of the disk
carrier (see also section “HDD LEDs” on
page 2-4):
off Hard disk is idle.
green Hard disk is accessed.
red A hard disk or hard disk carrier related
error has occurred.
The LEDs can be seen only when they are flashing because they are lo-
cated behind the white strip and thus not visible when off.
Further information about what to do in case of an alarm can be found
in section “Troubleshooting” on page A-2.
1 2 3 4 5 6
7 8 9