DVS SpycerBox Flex, Руководство по оборудованию

Страница: 57 / 84

5-11 SpycerBox Ultra/Flex | Hardware Guide | Version 3.1
Rohde & Schwarz DVS GmbH
Maintenance
 Fan Maintenance
Figure 5-4: Removal of fan module
This will sever the connection of the fan to the system.
9. Unscrew the finger protection grille from the broken fan and after-
wards screw off the fan from the fan bracket.
10.
Replace the broken fan with a new one and reassemble the fan
module: Screw the fan to the fan bracket and afterwards the fin-
ger protection grille to the fan.
11.
Re-insert the repaired fan module into the system.
12.
Next close the casing of the system as described in section “Clos-
ing the Casing” on page 5-9.
With the last step finished you have successfully replaced the defective
fan module. Once the system is turned on, no alarm should be sounded
anymore.
System damage
Others than the original manufacturer spare parts might damage
your system.
Only use original manufacturer spare parts.
See to it that the fan module plugs properly into the system’s fan inter-
face and that, when completely inserted, the locking mechanism snaps
back into its locked position.