Dustbane 19352-C-AGM, Руководство по эксплуатации

Страница: 9 / 21

7
5.3.1. Batteries: removal
When removing the batteries, the operator must be equipped with suitable personal
protection devices (gloves, goggles, overalls, safety shoes, etc) to reduce the risk of
accidents. Make sure the switches on the control panel are in the “0” position (off) and the
machine is turned off. Keep away from naked flames, do not short circuit the battery poles,
do not cause sparks and do not smoke.
Danger
Proceed as follows:
1. Disconnect the battery wiring and bridge terminals from the battery poles.
2. If necessary, remove the devices fixing the battery to the base of the machine.
3. Lift the batteries from the compartment using suitable lifting equipment.
5.4. Battery charger (battery models)
Important
Never allow the batteries to become excessively flat as this could damage them irreparably.
5.5. Lifting and transporting the machine
Important
All phases must be performed in an adequately lit room and adopting the safety measures
most appropriate to the situation. The operator must always use personal protection
devices.
To load the machine onto a means of transport, proceed as follows:
1. empty the dirty water and solution tanks;
2. place the machine in the packaging, then rest the packaging on a pallet and fix it with plastic straps;
3. lift the pallet (with the machine) using a fork lift truck and load it onto the means of transport;
4. anchor the machine to the means of transport with cables connected to the pallet and machine itself.
6. Practical Guide For The Operator
6.1. Controls – Description
The machine has the following controls and indicator lights:
•
Battery charge light
(ref. 2): 3 LEDs (red, yellow and green) which indicate the level of battery charge.
There may be: