Dustbane 19352-C-AGM, Руководство по эксплуатации

Страница: 13 / 21

11
If you are using the machine for the first time, we recommend trying it on a large obstacle-
free surface first to acquire the necessary familiarity.
Always empty the dirty water tank before filling the detergent tank again.
Information
For effective cleaning and to extend the working life of the machine, follow a few simple rules:
• prepare the work area by removing all possible obstacles;
• begin working from the furthermost point to avoid walking on the area you have just cleaned;
• choose the straightest possible working routes;
• divide large floors into parallel rectangular sections;
• if necessary, finish off by passing a mop or rag rapidly over parts inaccessible to the automatic scrubber.
6.7. Working
After setting up the machine, proceed as follows:
1. lower the squeegee by means of the squeegee lever;
2. press the main switch (LED on);
3. press the brush button (LED on)”, the suction motor and detergent flow are also activated
automatically;
4. press the brush lever;
5. check regularly that detergent is reaching the brushes and top up if necessary;
6. while working, check the quality of washing and adjust the flow of detergent to the brushes using
the solution tap (ref. 2).
Important
Empty the dirty water tank each time you fill the solution tank.
• The float switch in the recovery tank turns suction off when the tank is full. If the switch trips, stop
work and empty the tank.
• If the red LED starts flashing, the batteries are nearly flat. After a few seconds, the brush and suction
motor shut down to prevent draining the batteries excessively. Charge the batteries.