Dustbane 19352-C-AGM, Руководство по эксплуатации

Страница: 11 / 21

9
1. check that the squeegee mount is lowered, otherwise lower it by means of the squeegee lever;
2. rotate the machine backwards and rest the handle on the floor;
3. insert the two threaded pins on the squeegee into the slots on the support;
4. fix the squeegee by tightening the two knobs;
5. insert the sleeve of the suction hose fully into the squeegee; The squeegee blades scrape the film of
water and detergent from the floor and prepare the way for perfect drying. With time, the constant
rubbing makes the edge of the blade in contact with the floor rounded and cracked, reducing the
drying efficiency and requiring it to be replaced. The state of wear should be checked frequently.
For perfect drying, the squeegee must be adjusted in such a way that the edge of the rear blade
bends during operation by about 45° with respect to the floor at every point. Adjust the height of the
blade during operation by regulating the height of the wheels positioned behind and alongside the
squeegee (ref. 3).
6.3. Moving the machine when not in operation
To move the machine, proceed as follows:
1. lift the squeegee using the squeegee lever;
2. raise the front of the machine by levering on the handle and move it to the destination;
3. on arrival, lower the front of the machine.
6.4. Mounting and changing the brush/drive disks
Important
Never work without the brushes and drive disks correctly installed.