Dustbane 19352-C-AGM, Руководство по эксплуатации

Страница: 7 / 21

5
• The fluids collected contain detergent, disinfectant, water and organic and inorganic material. They
must be disposed off in accordance with current legislation.
• In the case of malfunction and/or faulty operation, turn the machine off immediately (disconnecting
it from the batteries) and do not tamper. Contact a service center authorized by the Manufacturer.
• All maintenance operations must be performed in an adequately lit place and only after
disconnecting the machine from the power supply in battery models by disconnecting the battery
connector;
• All work on the electrical system and all maintenance and repair operations other than those explicitly
described in this manual must be performed by specialized personnel expert in the sector only.
Special waste. Do not dispose of with ordinary waste.
5. Handling And Installation
5.1. Lifting and transporting the packaged machine
Important
During all lifting operations, make sure the packaged machine is firmly anchored to avoid it
tipping up or being accidentally dropped.
Always load/unload lorries in adequately lit areas.
The machine, packaged on a wooden pallet by the Manufacturer, must be loaded using suitable equipment
onto the transporting vehicle. At destination, it must be unloaded using similar means.
A fork lift truck must always be used to lift the packaged body of the machine. Handle with care to avoid
knocking or overturning the machine.
5.2. Checks on delivery
When the carrier delivers the machine, make sure the packaging and machine are both whole and undamaged.
If the machine is damaged, make sure the carrier is aware of the damage and before accepting the goods,
reserve the right (in writing) to request compensation for the damage.
5.3. Unpacking
Important
When unpacking the machine, the operator must be provided with the necessary personal
protection devices (gloves, goggles, etc) to limit the risk of accident.
Unpack the machine as follows:
1. cut and remove the plastic straps using scissors or nippers;
2. open the packaging;
3. remove the bags included in the packaging and check the contents:
• guarantee slip;
• use and maintenance manual;
• battery bridges with terminals (battery model only);
• battery charger connector (battery models only);