manualshive.com logo in svg

Dustbane 19352-C-AGM, Руководство по эксплуатации

Поделиться
Скачать
Dustbane 19352-C-AGM Скачать руководство пользователя страница 20

18

No detergent  

is delivered

The detergent button LED is off.

Press the detergent button.

Solution tank empty.

Fill the solution tank.

The brush motor is off.

Turn the motor on by operating the brush lever.

The hose delivering the detergent to the brush is 
blocked.

Unblock and open the circuit.

The tap is dirty or faulty.

Have the tap cleaned or replaced.

The solenoid valve is faulty.

Replace the solenoid valve.

The detergent flow 

does not stop

The solenoid valve is faulty.

Replace the solenoid valve.

The suction motor 

does not start

The suction button LED is off.

Press the suction button.

There is no power to the suction motor or the 
motor is faulty.

Check that the motor power connector is correctly 
connected to the main wiring; if it is correctly 
connected, have the motor replaced.

MOSFET temperature >150°C.

Stop the machine, leave to cool down for 45’.

Excessive motor absorption >30 A for 2 second.

Stop the machine and check the motor.

The squeegee does 

not clean or suction is 

ineffective

The edge of the rubber blades in contact with the 
floor is worn.

Replace the rubber blade.

The squeegee or hose is blocked or damaged.

Unblock and repair the damage.

The float switch has tripped (recovery tank),  
is clogged by dirt or broken.

Empty the recovery tank or reset the float switch.

The suction hose is blocked.

Unblock the hose.

The suction hose is not connected to the squeegee 
or is damaged.

Connect or repair the hose.

There is no power to the suction motor  
or the motor is faulty.

See: “The suction motor does not start”.

The batteries do not 

provide the normal 

work time (battery 

models only)

The battery poles and charging terminals are dirty 
and oxidized.

Clean and grease the poles and terminals, charge 
the batteries.

The electrolyte level is low.

Top up all the elements with distilled water as 
described in the instructions.

The battery charger does not work or is unsuitable.

See battery charger instructions.

There are considerable differences in density 
between the various elements of the battery.

Replace the damaged battery.

Содержание 19352-C-AGM






















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды