Dustbane 19352-C-AGM, Руководство по эксплуатации

Страница: 18 / 21

16
1. lower the squeegee by means of the squeegee lever;
2. tip the machine backwards and rest the handle on the floor.
3. remove the suction hose sleeve (ref. 4) from the squeegee;
4. remove the squeegee (ref. 1) from its mount by completely unscrewing the two knobs (ref. 2)
5. remove the blade retainers and blades by unscrewing the knobs (ref. 5);
6. reuse the same blade by reversing the edge in contact with the floor until both edges are worn out,
or replace with a new blade, fitting it onto the screws on the body of the squeegee;
7. replace the two blade retainers and the blades and screw up the knobs unscrewed previously;
8. replace the squeegee in its support.
9.2.3 Fuses: replacement
The fuse protecting the electrical circuit is located on the battery bridge.
To replace it:
1. make sure the recovery tank is empty and empty if necessary;
2. lift the recovery tank to access the batteries;
3. lift the fuse holder lid and remove the fuse;
4. fit a new fuse and close the fuse holder cover;
5. lower the recovery tank.
Fuse table:
for the complete fuse table, see the spare parts catalogue.