DURKOPP ADLER 577 Series, Руководство пользователя

Страница: 126 / 202

6. Sewing
NOTE !
Do not start sewing with the machine before is has been fully
assembled and before, among others, all the protective devices has
been installed.!
6.1 Normal sewing process
Start the sewing process
–
Turn on the main switch.
–
If the sewing cage is not lifted, turn the crank until the sewing cage
stands in its rear position (initial position). The sewing cage will be
lifted.
–
Insert the material to be sewn.
–
Start the sewing process by treading the pedal forwards
(the sewing cage will be lowered, the buttonhole will be sewn, the
knife will act, the threads will be cut off and the sewing cage will be
lifted)
–
For being able to start a new sewing process, Before the end of
the sewing process, the pedal must be returned to its neutral
position, in order to enable the start of the next sewing cycle.
6.2 Interruption of the sewing cycle
The sewing cycle can be interrupted as follows:
Interruption by the operator
–
By treading the pedal backwards, the sewing process will be
interrupted within the buttonhole.
–
The error message "_1 000" will be displayed.
–
Turn off main switch and eliminate the cause for the interruption.
Interruption by thread breakage
–
The error message "_0 100" will be displayed.
–
The sewing cage will be moved, without needle thread, up to the
buttonhole end, the knife and the thread cutter will not act and the
sewing cage will not be lifted.
–
Thread the needle according to chapter 4.1.
Following is to be noted after an interruption
–
If the sewing cage stands in its initial position (rear position), it can
be lifted by treading the pedal backwards.
–
If the commenced buttonhole is to be completed by a repair seam,
the sewing cage should not stand in its initial position (rear
position) when the main switch is turned on again, because
otherwise it will be lifted.
Before turning on the main switch, take the sewing cage to the
repair point by turning the crank.
–
If the repair point lies within the second half of the second
buttonhole lip (short before the buttonhole end), a complete
buttonhole will be sewn as a repair seam.
24