❏
3. Attach the steering servo assembly to the chassis with
(4) 3 x 8mm self-tapping screws in the holes provided as
shown above.
❏
4. Locate the steering rod, servo saver, metal rod
connector and two plastic rod ends. Thread two plastic rod
ends onto the steering rod as shown above, leaving 20mm
between the rod ends.
❏
5. Use the included servo saver. Install the metal rod
connectors into the rod ends on the steering rod. Using a 3
x 20mm socket head screw and a 3mm lock nut, attach one
end of the steering rod to the servo saver as shown.
❏
6. Attach the other end of the steering rod using another
3 x 20mm socket head screw and a 3mm locknut as shown.
❏
7. Place the servo saver onto the steering servo as shown.
8
