❏
13. Using the DuraTrax R/C body reamer, drill six 1/4"
(6mm) holes in the body using the molded-in dimples as
guides. Install the rollbar onto body as shown using six 2.6
x 6mm self-tapping screws and the included collars.
❏
14. Drill two 1/4" (6mm) holes in front of body using the
molded-in dimples as guides. Install the front brush guard
as shown with two 2.6 x 6mm self-tapping screws and the
collars included.
❏
15. Drill one 1/8" (3mm) hole in each side of the body
using the molded-in dimple as a guide. Install the mirrors as
shown with the collar and 3mm nut provided.
❏
16. Apply decals to body if desired.
❏
17. Remove the body clips from the parts bag. Place the body
on the body mounts. On each body mount place a body clip.
Congratulations,
you have completed preparations! Before
running your new truck, please take the time to carefully
read the instructions and watch the video before running
and breaking-in the engine. Make sure you follow the safety
precautions and most of all
...
HAVE FUN!
6
