Duplo DC-646, Инструкция по эксплуатации

Страница: 121 / 244

101
2
PC Controller Setting
4
Programming a JOB for DC-646 V
ia Computer (PC Controller)
Click WIZARD .
Select a JOB programming mode.
When the
Advanced Mode check box is selected, the
advanced mode is selected.
When it is cleared, the simple mode is selected.
Inch>> mm
If you select the Inch>> mm check box, the values
entered in inches are converted to ones in millimeters
and displayed.
The values entered before selecting the check box are
not converted.
Make sure to select the check box before entering
values. You can enter values to three places of decimals
in inches.
REFERENCE
If you select the check box in the upper right part of the
screen (
WIZARD or DIRECT ), you can lock the JOB.
( → P.97 Locking a JOB)
Select a module from the Slot 2 [L/R] box and click
NEXT .
Standard Module
Slitter Module
CPM (Cross Tool Module)
(option)
RTM (Rotary Tool Module) (option)
REFERENCE
Refer to the instruction manual of each optional module
for programming a JOB with an optional module.