manualshive.com logo in svg

Duplo DC-646, Инструкция по эксплуатации, Страница: 231 / 244

Поделиться
Скачать
Duplo DC-646 Скачать руководство пользователя страница 231

211

Daily Maintenance

6

About Protection of 

Press Rollers

If the 

press rollers 

stay

 at the same position for a long time, they may be deformed by the 

pressure from the

 back-up rollers

. To prevent them from being deformed, if the machine does 

not operate for one hour with the power on, the rollers automatically rotate at low speed.
When you do not operate the machine for a long period of time (approx. two weeks), release the 
contact of the 

back-up rollers 

and the 

press rollers

 

according to the following procedure.  

The hexagon socket head cap screws releasing the contact of the 

back-up rollers 

and the 

press 

rollers

 

are located at 11 places on the operator’s side and the non-operator’s side shown in the 

fi

 gure below.

Loosen them by using the supplied hexagon wrench.

The screws 

1

 to 

8

, and 

10

 to 

11

 are located at the upper side and can be loosened directly. The 

screw 

9

 is located at the lower side.  

Non-operator’s side

Ejection side

Document feed side

Operator’s side

1

2

4

5

6

7

8

9

10

11

3

1

2

3

4

5

6

7

8

1110

9

Содержание DC-646





















































































































































































































































Отзывы:

Нет отзывов