Duplo DC-646, Инструкция по эксплуатации, Страница: 236 / 244

216
Specifications
Model name DC-646
Product type Slitter/Cutter/Creaser Floor model
Feeding method Belt suction
Feed tray Elevator
Programmable document
size
Width: 210.0–370.0 mm (8.27–14.56 in)
Length: 210.0–999.9 mm (8.27– 39.36 in)
Minimum fi nishing size Width: 48 mm (1.89 in)
Length: 50 mm
Document weight Min: 110 gsm
Max: 350 gsm
● Laminated or UV coated stock: within the above range including
lamination/coating layer.
Document type Coat, non-coat, laminated
Paper curl No curl (within 5 mm)
Feeder capacity 100 mm
* Feed tray length: 710 mm
* There is the load limitation for a document of over 670 mm.
Speed 30 sheets/min (A4 SEF, 2 cuts and 1 crease)
With REG ON (Every sheet): 22 sheets/min
Tolerance +/- 0.2 mm from the programmed positions
Business card: +/- 0.3 mm
(When using creasing, the cut and crease accuracy may be e ff ected
by number of creases and the depth of creases.)
* Processing accuracy for documents of over 670 mm may vary.
Side margin slits positions 3.2–55 mm from the side edges
Number of slits
Max 6 slits on 1 document
(Side margin slit × 2, Center slits × 4)
Gutter slit widths 5.0–15.0 mm
(Gutter slit wider than 15 mm are output on the exit tray.)
Gutter slit de fl ector Max 2, automatic control
Number of cuts Max 30 cuts on 1 document
Cut positions Lead cut trim: min 3 mm
Gutter cut: min 3 mm
Last cut trim: min 5 mm
Number of creases Max 20 creases on 1 document
Crease depth adjustment 3 steps (from the control panel or from the PC Controller)
Exit tray Drop down tray
Exit tray capacity 140 mm
* Exit tray length: 670 mm
Card stacker capacity 60 mm
Control panel 64 dots×128 dots LCD, OK monitor
Panel languages English, French, German, Italian, Spanish, Polish, Russian, Japanese
Job program From the control panel and/or from the PC Controller