Duplo DC-646, Инструкция по эксплуатации, Страница: 85 / 244

65
2
Function Setting
Basic Operations
3
RTM on pos adj
You can adjust a processing start position when the RTM (rotary
tool module (option)) is installed.
Use the CURSOR (Right/Left) key to select shift direction and
use the NUMERIC key to enter a value. Then press the CURSOR
(Down) key.
+: Shifts a processing start position toward the document rear
edge from its reference position.
− : Shifts a processing start position toward the document lead
edge from its reference position.
Settings2
+0.0mm
RTM on pos adj
*/**
RTM o ff pos adj
You can adjust a processing end position when the RTM (rotary
tool module (option)) is installed.
Use the CURSOR (Right/Left) key to select shift direction and
use the NUMERIC key to enter a value. Then press the CURSOR
(Down) key.
+: Shifts a processing end position toward the document rear
edge from its reference position.
− : Shifts a processing end position toward the document lead
edge from its reference position.
+0.0mm
Settings2
RTM o ff pos adj
*/**
Press the SET key.
IMPORTANT
● If you exit Function Setting without pressing the SET key, the function set are
not saved.
● If you press the SET key before completing Function Setting , the setting you
have just entered is saved and the standby screen reappears.