5
T
echnical Data
Fig.1.
SWITFT6CB driver motherboard view, with indication of most important elements
1
2
3
4
5
6
7
8
9
10
15
18
19
20
17
6
3
5
1
8
9
7
10
11
14
21
22
12
13
P/P
PROG. STOP
2
16
4
4.3. SWIFT6 driver electric connections description
4.3.1. Network power supply clamps 230VAC, 50Hz L, N, PE (1-2, fig.2)
Connect the phase (L), neutral wire (N) to proper clamps. Protective wire (PE) connect directly to the
body of the engine of SWIFT6 drive.
4.3.2. Clamps for connecting motor CH, C, AP, and condenser … (27-28 and 30-31, fig.2)
Connect the engine of SWIFT6 drive to clamps CH, C, AP. Condenser 16uF/450V must be connected to
clamps
. If while programming the gate opens in the wrong way it is necessary to change wires on clamps CH
and AP.
4.3.3. Clamps for connecting limit switch FCA, C, FCC (18-20, fig.2)
Clamps are used to connect built in limit switch. Magnets which cooperate with the switch have
different polarization. Before the programming make manual move with gate and make sure that the switch
correctly interprets outermost positions of the gate (gate closed - FCC diode turned off, gate opened FCA diode
turned off; 16, fig. 1). If the switch operates in opposite way turn the magnets 180 degrees after earlier removing
the cases - catch in the top part of the magnet. Magnet with the tag (white stripe) directed toward the switch
activates FCC switch (gate closed) and magnet with the tag directed toward the handle activates FCA switch
(gate open).
Содержание SWIFT6
Страница 2: ......
