21
1
2
3
ABC1
DEF2
GHI3
4
5
6
JKL4
MNO5
PQR6
7
8
9
STU7
VWX8
YZ90
∗
0
#
OPTIONS
SPACE
NOT USED
Alphabet layout on the Keypad
Chapter 6: Zone Labels
ZO
N
E
LA
B
E
LS
The letters of the alphabet have been assigned to the Number Keys on the
Keypad in groups of three. To enter a letter, press a Number Key once to
enter the first letter, twice to enter the second letter, three times to enter the
third letter, and finally four times to enter the number itself. For example, to
enter the letter “F”, press the [2] Key three times. When a different key is
pressed to enter another letter, the cursor will automatically move to the right
to enter the next letter.
To erase a letter, move the cursor to the letter
before
before
before
before
before the one to be erased
using the
-YES and
-NO Keys and press the
Key.
The
Key is slightly different from the other keys: one press will produce the letter “Y”,
two presses the letter “Z”, three presses the number “9” and four presses the number “0”
(zero).
6 B: Label Editing Options
At any time while editing a Zone Label, press the
Key to display a list of options
underneath the Zone Label presently being changed. When the
Key is pressed, the
following message is displayed:
This option allows characters to be entered by typing in a 3-digit code. Press the
-
NO Key to advance to the next option. When the
-YES Key is pressed, the next
message will be displayed.
Refer to Appendix C of this manual: ASCII Character Chart. To enter a letter, enter a
3-digit number from 000 to 255. When a number is entered, the character selected will
be added and the display will return to the Label Editing Message.
This option saves the new label in the system’s memory and will exit the Zone Label
Editing Mode. Press the
-NO Key to display the next option.
This option clears the entire label. Use this option to erase a label quickly, rather than
having to erase each letter individually. Press the
-NO Key to display the next
option.
This option clears the letter above the cursor and all letters to the end of the line. Use
this option to quickly erase part of a label without erasing the letters just entered. Press
the
-NO Key to display the next option.
This option cancels the Zone Label Editing Mode without saving any changes. Use
this option to prevent changes from being made if a mistake is made in editing the
Zone Label. Press the
-NO Key to return to editing the Zone Label.