9
3 C: Enrolling Sounders
Chapter 3: Adding Components
A
DDI
NG
CO
M
P
O
N
E
N
T
S
Enter the Enrollment Mode as described in 3 B: Entering the Enrollment Mode
Do not install batteries in the Sounder until the Sounder is ready to be mounted in its
permanent location.
Plug the Sounder’s AC Adaptor into a wall outlet and plug the Adaptor into
the Sounder AC Jack. A loud beep will sound.
Enter the Sounder’s Serial Number on the
keypad.
Press the
-YES Key. The Sounder will
sound two short beeps.
Secure the Sounder to its Backplate. The
Sounder will again sound two short beeps.
As the Sounder is enrolled, the Enrollment
Screen will be updated to indicate how
many Sounders are installed on the system.
If a second Sounder is required, enroll the Sounder as described in Steps 1
through 5 above. As the second Sounder is enrolled, both Sounders will
beep during the enrollment.
No more then 2 sounders may be enrolled on any one system.