12
3 F: Reviewing the List of Enrolled Components
In the Installer’s Programming Mode, you can display a list of all the components enrolled on
the system. This function will display all of the detection devices and the zones they are
assigned to, as well as the number of Sounders and Keypads enrolled on the system.
Chapter 3: Adding Components
Entering the Enrollment Mode
(See Section 3B to Enter the Enrollment Mode)
Press the
-YES Key when this message
is displayed.
Use the
-NO Key to scroll to this
message. Press the
-YES Key when this
message is displayed.
Use the
-YES Key to scroll through the
list of system components.
Detection Devices
will be indicated with
messages similar to this one.
Sounders
will be indicated with messages
similar to this one.
Keypads
will be indicated with messages
similar to this one.
When all components have been displayed,
this message will be displayed.
To display the Serial Number of a
component, press the [
∗
] Key while
reviewing Enrolled Components List. When
the [
∗
] Key is pressed, a message similar to
the one shown here will be displayed for a
few seconds.
*
The "ZONE LABEL" can be any discription of up to 16 letters, numbers, spaces or ASCII
characters. See Section 6 for more information.