10
3 D: Enrolling Detection Devices
As each detection device is enrolled it is assigned to the first available Zone. That is, the
first device will be assigned to Zone 1, the second will be assigned to Zone 2, and so on. A
maximum of 10 detection devices may be enrolled.
Chapter 3: Adding Components
Enter the Serial Number of the detection
device to be enrolled.
Press the
-YES Key. The Sounders will
sound two short beeps.
Install the batteries in the detection device. Refer to the label on the back of
the unit and ensure that the batteries are installed correctly. When the
batteries are installed, the Sounders will beep twice.
Secure the detection device to its backplate.
The Sounders will again sound two short
beeps. As each device is enrolled, the
Enrollment Screen will be updated to indicate
how many components are installed on the
system.
Repeat Steps 1 through 4 above for all remaining detection devices.
• Up to 2 Keypads may be enrolled on the system
• Up to 2 Sounders may be enrolled on the system
• Up to 10 Detection Devices may be enrolled on the system