DSC PowerSeries PC1404 V1.1 Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 56

DSC PowerSeries PC1404 V1.1 Скачать руководство пользователя страница 43

PC1404

Trouble [5] Zone Fault Press [5] to determine specific zones with a Fault trouble

Open circuit is present on one or more
fire zones on the main panel or zone
expander

•

Ensure fire zones have a 5.6K resistor (Green, Blue,
Red) connected.

•

Remove the wire leads from Z and COM terminals and
measure the resistance of the wire leads.
- An open circuit indicates a break in the wiring or resis-
tor not connected.

•

Connect a 5.6K resistor (Green, Blue, Red) across the Z
and COM terminals. Verify the trouble condition clears.

An open circuit is present on PGM 2

being used as a 2-wire smoke detector
input

•

Ensure the correct 2.2K end-of-line resistor is connected
(Red, Red, Red).

•

Remove the wire leads from PGM2 and AUX+ termi-
nals and measure the resistance of the wire leads.
- An open circuit indicates a break in the wiring or no
resistor connected.

•

Connect a 2.2K resistor (Red, Red, Red) across the
PGM 2 and AUX+ terminals. Verify the trouble condi-
tion clears.

A short circuit is present on one or more

zones with double end-of-line resistors
enabled

•

Remove the wire leads from Z and COM terminals and
measure the resistance of the wire leads.
- A short circuit indicates a short in the wiring.

•

Connect a 5.6K resistor (Green, Blue, Red) across the Z
and COM terminals.
- Verify the trouble condition clears.

Trouble [6] Zone Tamper Press [6] to determine specific zones with a tamper trouble

An open circuit is present on one or more

zones with double end-of-line resistors
enabled.

•

Remove the wire leads from Z and COM terminals.

•

Measure the resistance of the wire leads.
-Open circuit indicates a break in the wiring.

•

Connect a 5.6K resistor (Green, Blue, Red) across the Z
and COM terminals.

•

Verify the trouble condition clears.

Trouble [7] Not Used
Trouble [8] Loss of Clock/Date

Loss of time and date

The main panel internal clock is not set. To program the time and date:

•

Enter [

][6][Master Code] then Press [1].

•

Enter the time and date (in military) using the following
format:

HH:MM MM/DD/YY

Example

.

For 6:00 pm, Nov. 30, 2007

Enter:

[18] [00] [11] [30] [07]

Trouble

Cause

Troubleshooting

«
...
41
42
43
44
45
...
»

Содержание PowerSeries PC1404 V1.1

























































Отзывы:

Нет отзывов