DSC PC1150, Инструкция по эксплуатации

Страница: 20 / 38

1st System Option Code
When Section is entered, the 4 Zone Lights, “Ready” and “Armed” lights will indicate which options are
enabled. If a light is ON, that option is enabled; if a light is OFF, that option is disabled.
To enable or disable an option, press a number from to is used for the “Ready” light, and is used
for the “Armed” light. If the light indicating the option was OFF, it will come ON; if the light indicating the option
was ON, it will go OFF. Press [0] to shut all lights OFF.
LIGHT
ON =
. OFF =
ON =
l
OFF =
l
ON =
OFF =
141
l
ON =
OFF =
ON =
l
OFF =
. ON =
OFF =
Communicator disabled
Communicator Enabled
Transmission per 24 hour period
Transmission per armed period
Alarm display while armed
No alarm display while armed
DTMF
Pulse dialling
N.C. zones (except fire zones)
End-of-line resistor
audible
silent
[R] “Ready” light; [A] = “Armed” light
l
Factory default settings
DTMF dialling will default to pulse dialling after 2 unsuccessful DTMF dialling attempts.
Must be programmed for UL installations.
2nd System Option Code
Refer to Section for programming information.
LIGHT
l
ON
Zone 4 N.O. without EOL
OFF = Zone 4 is normal
ON = Master Code not user changeable
l
OFF = Master Code user changeable
ON = Siren squawk
l
OFF = Siren squawk disabled
ON = Not Used
. OFF =
Not Used
ON =
6th code is one-time use
l
OFF = 6th code is normal Access Code
ON = 1400 Hz handshake for Radionics formats B and C
l
OFF = 2300 Hz handshake for Radionics formats B and C
[R] = “Ready” light; [A] = “Armed” light
l
Factory default settings
n
With siren enabled, the siren will sound one short burst on arming and two short bursts on disarming.
NOTE: When Auto-Arming is enabled, the siren will sound 1 short burst every 10 seconds
for
one minute before
the panel Auto-Arms unless ‘Siren During Auto-Arm” is disabled in Section Light 2.
1 8
firealarmresources.com