DSC PC1150, Инструкция по эксплуатации

Страница: 15 / 38

Binary Data Display
Zone lights 1 through 4 are used to display the value of each digit of data in a binary format as shown here:
Value
Zone 1
Zone 2
Zone 3
Zone 4
HEX data entry
Refer to HEX Data Programming
Zone Light ON
0 Zone Light OFF
HEX Data Programming
Some programming sections require that data be entered in a HEX (hexadecimal, or base 16) format. HEX
numbering uses the digits 0 through 9 and the letters A through F.
The
A
through Fare represented by the number keys 1 through 6. To enter data in HEX format, first press
the Key. The “Ready” light will FLASH. Enter the HEX value, then press the Key again to return to the
normal data entry mode; the “Ready” light will stop flashing.
To enter HEX numbers:
A
Enter
B
Enter
C Enter
D
Enter
E
Enter
F
Enter
Enter before and digit. The last digit in each section does not require the final asterisk to
be entered.
firealarmresources.com