DSC Envoy NT9005EU, Инструкция по установке и программированию, Страница: 37 / 60

[202]-[205] Zone Assignment
33
[202]-[205] Zone Assignment FLASH
These eight bit toggle sections determine which zones on the system
are enabled. All zones that are enabled will be supervised via the
panel’s EOL supervision, and will operate according to the zone type
programmed. If a zone is disabled, it will not be supervised and
zone activity will be ignored by the panel.
☞
Attributes may be programmed by zone. See section [101-
132]
Section Zone Enabled Disabled
[202] 01
✓
02 ✓
03
✓
04 ✓
05
✓
06 ✓
07
✓
08 ✓
[203] 09
✓
10 ✓
11
✓
12 ✓
13
✓
14 ✓
15
✓
16 ✓
[204] 17
✓
18 ✓
19
✓
20 ✓
21
✓
22 ✓
23
✓
24 ✓
[205] 25
✓
26 ✓
27
✓
28 ✓
29
✓
30 ✓
31
✓
32 ✓
[301]-[311] Telephone Numbers
The telephone numbers entered here are for use by the system to
send reporting codes to the central monitoring station, a residential
telephone or pager.
All telephone numbers are 32 digits in length. Hexadecimal digits
may be programmed in the telephone number to perform certain
functions.
☞
The default for contents of sections [301]-[303] is D followed
by 31 ‘F’s :
Enter [*][2][*]
Enter [*][3][*]
Enter [*][4][*]
Enter [*][5][*]
Hex B to dial ‘*’
Hex C to dial ‘#’
Hex D for additional dialtone search (required
for PBX telephone systems)
Hex E to insert a 2 second pause in the tele-
phone number
☞
HEX A is not used
HEX F represents the end of the Phone Number (everything
after F is ignored)
Pressing [#] in these sections will exit and save the entire
phone number.
If a telephone number is not programmed, the panel will not
attempt to communicate.
This applies to Telephone Numbers 1 and 2.
[301] First Telephone Number (32 Dig-
its)
FLASH
I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I
I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I
[302] Second Telephone Number (32 Digits)
I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I
I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I
[303] Third Telephone Number (32 Digits)
I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I
I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I___I
☞
Use the [F] key to terminate phone number programming in
sections [301] - [303] .
[310] Phone Number 1/3 Account
Code FLASH
This is the Account Code used by the panel when communicating
via Phone Numbers 1 and 3
Default FFFF I___I___I___I___I Codes are 4 digits in length.
Valid entries are 0000-FFFF.
[311] Phone Number 2 Account Code
This is the Account Code used by the panel when communicating
via Phone Number 2.
Default FFFF I___I___I___I___I Codes are 4 digits in length.
Valid entries are 0000-FFFF.
firealarmresources.com