LPV1200 DUO SYSTEM
Page 15 of 40
(
Ⅲ
).Removal of this machine (please refer to figure 5)
1
Rack support beam
2
Mainframe
3
Feeding roller (module)
4
Feeding roller holder
5
Wood belt fixing the mainframe
6
Pallet of the packing box
The laminator is sealed with a plastic housing to prevent dust and moisture.
1. The laminator is lifted up to separate from the packing case base.
(
Ⅳ
). Installations of the machine on its stand (Please refer to figure 6)
1.
Lift up the main engine and install on the special stands (Please refer to figure 6)
2.
After the mainframe is installed on the rack, open end covers on both sides of the mainframe
and use socket head cap screws and leveling bending-plate in the accessory case to connect
the mainframe with the rack. Then, close the end covers on both sides of the mainframe to
complete the connection.
(
Figure 5
)