LPV1200 DUO SYSTEM
Page 26 of 40
1
Front working penal
2
Front upper roller
3
Pressure-adjust linkage shaft
4
Upper
guiding roller
5
Film
6
Backing paper roller
7
Backing paper
8
Mandrel shaft
9
Rear upper roller
10
Rear lower roller
11
Lining paper roller (for double side adhesive film lamination)
12
Lining paper (double-side adhesive film)
13
Lower guide roller
14
Front lower roller
3. Functions Set-up:
1) Place cold and heating switch to Cold when doing cold laminating work;
2) Turn the speed knob to what you require;
4. Separate one end of the roll with adhesive film with a cutter and cut out the backing papers
straightly, pull up the backing paper and stick it to the paper tube of the backing paper roller (or
stick it directly to the backing paper roller), adjust the pressure-adjust nuts of backing paper so
as to add proper friction force to its roller.
5. With the trimness of the front end of text and drawings, align the two sides of text and drawings
to the two sides of film, then feed the text and drawings with the pedal switch in between the
two rollers. Then, press “Continue” and let go the pedal switch to complete the work.
6. If the front ends of text and drawings are not trim, you should lift up slightly the upper roller.
After having adjusted the trimness between text & drawings and the two sides of adhesive film,
lower down the front upper roller, press the pedal switch and feed the text and drawings in
