LPV1200 DUO SYSTEM
Page 7 of 40
Ⅲ
. Safety Indications (cont’d)
During the laminating operations, please don’t place anything except materials to be laminated on
the machine. Any accidental entanglements will cause damage to rollers or the machine.
Do not attempt to laminate metal materials or other hard objects. Do not put sharp
objects into the machine (for example, tools, rulers and knives, etc.).
To avoid damage to rollers do not cut adhesive films directly on the surfaces of the rollers.
To avoid foot injuries be cautious of the casters.
When service is required no one except professionals, shall open the machine for repairs. Please
send for professionals or local distributors to do the work.
Before repairing any mechanical or electrical problems, first shut off the power supply.
Never adjust or service the machine with the power on.
Shut off this machine soon after laminating is finished.
Unplug the machine if it is not being used for long periods of time and lift up the upper
roller so as to avoid the distortion of roller’s surface.
Do not use corrosive liquids to clean this machine, otherwise the machine or rollers could be
damaged. Use only alcohol and a soft dry cloth to wipe the surfaces of the rollers.
