LPV1200 DUO SYSTEM
Page 6 of 40
Ⅲ
. Safety Indications
Before operation ensure that the voltage of power supply you are using matches rated
working voltage
The power supply wires should be connected with air switches with leakage protection
and the rated current should be 20A or more.
The power supply should be near the machine for convenient use.
The leads and electric components should comply with the power requirements of this machine.
This machine must be grounded to ensure safe use during operations.
No one, except the operator of this machine, is allowed to touch any components or control buttons.
Don’t use damaged wires and sockets with electric leakage. Power supply wires should not be
squeezed or crushed by any hard objects.
If abnormal circumstances occur, shut off the power supply.
This machine is equipped with a heating system. Do not touch the surface of rollers
during operations so as to avoid burns.
When laminating start by operating at a lower speed with the pedal switch.
Keep rigid materials away from the surfaces of the rollers during operations, otherwise the rollers
could be damaged which will adversely affect lamination quality.
During operation, ensure that clothing and hair do not come in contact with the machine.
